Specialty Archery Short Draw Apertures
Short Draw Apertures are for use in ONLY the Short Draw Peep.
Aperture Sizes: 1/32”, 3/64”, 1/16”, 3/32” and 1/8”.
These apertures will NOT fit in any other Specialty Peeps.
Short Draw Length? This peep has 49- and 53-degree string angle options for you.
- Increase your apparent magnification by reducing your hole size.NOTE: for larger scopes you may also want to consider one of the PXL Hunter or Large Peep Housing.
- Select an aperture size that will fit tightly around the scope housing when looking through the peep at the scope while at full draw.
- If you are using too large of an aperture, accuracy may suffer due to improper alignment of the scope and peep.
- If you are using too small of an aperture, you may lose some field of view of the scope lens and restrict the amount of light, making for a dim sight picture.
- If you use a 1 3/8”, or Versa² scope, try the 1/32”, 3/64”, or 1/16” Aperture.
- If you use a 1 5/8” or the Versa² scope, try the 3/64”, 1/16”, or 3/32” Aperture.
- If you use the Super D or Versa³ try the 3/32”, 1/8”, 5/32″ or 1/4″ Apertures.
- The optional Verifier lenses sharpen the pins.
- The optional Clarifiers when used with a scope and lens sharpen the target face.
Aperture options:
- 5 SD Short Draw Capture Apertures.
- #SD031 1/32″ SD Short Draw Peep Capture Aperture.
- #SD047 3/64″ SD Short Draw Peep Capture Aperture.
- #SD063 1/16″ SD Short Draw Peep Capture Aperture.
- #SD094 3/32″ SD Short Draw Peep Capture Aperture.
- #SD125 1/8″ SD Short Draw Peep Capture Aperture.
- Required Accessories:
- #SD__ SD Short Draw Peep.
- SD Short Draw Peep and component weights:
- SD Short Draw Peep – 14.5 grains
- SD Short Draw Peep Capture Aperture – 4.5 grains
- SD Short Draw Peep Clarifiers/Verifiers – 1.0 grains
